DC connector

Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.


Less maintenance and aging when the battery is not in use:the Storage Mode

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.


Protected against overheating and reverse polarity connection

The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.


Five LED’s for status and mode indication

When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge profiles with the MODE button:

1. Current limited t0 0,8A and 14,4V absorption voltage. The red LED <14Ah will be on.

2. Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.

3. Current 4A and 14,7V absorption voltage. The red LED COLD will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example). 

Battery Chargers
Battery Voltage 12V
Charging Current 4A or 0.8A
Weather Protection IP65

Write a review

Please login or register to review

Victron Automotive IP65 Battery Charger 4A - 0,8A with DC connector

  • Brand: Victron
  • Product Code: Victron Automotive IP65 Battery Charger
  • SKU:
  • R750.00

  • Ex Tax: R652.17

Tags: Victron, Automotive charger, IP65 Battery Charger, 4A - 0, 8A, 12V